Crew
What´s the command should I add to panel.cfg to appear radios in the panel. I am asking this because I was in approach procedure in Bermuda and when I tried to tune ILS 30 I simply could not change the frequency of the NAV 1. I wonder adding the command to panel.cfg that make show radio freq would fix it
Thanks
you need to check your aircraft.cfg, not panel.cfg.
From the default 737 (FS2004, should be similar in FSX):
[Radios]
// Radio Type = availiable, standby frequency, has glide slope
Audio.1 = 1
Com.1 = 1, 1
Com.2 = 1, 1
Nav.1 = 1, 1, 1
Nav.2 = 1, 1, 0
Adf.1 = 1
Transponder.1 = 1
Marker.1 = 1
Hmmm I have this lines in aircraft.cfg:
[Radios]
// Radio Type=availiable, standby frequency, has glide slope
Audio.1= 1
Com.1= 1, 1
Com.2= 1, 1
Nav.1= 1, 1, 1
Nav.2= 1, 1, 0
Adf.1= 1
Transponder.1= 1
Marker.1= 1
Don´t know why I can not change frequencies in the NAV radio. Maybe because I am using our DC-10-30 wich was designed for FS 2002, but it´s just a guess..
Thanks anyway :-)
Some panels have more than one place to change the NAV frequencies. On the 757 panel I use, the NAV1 freq on the front panel is not clickable, but if I open the pedestal, it is clickable there. Might want to check and see if there is another place to change the frequency, either on a radios panel or another area.
Happy flying!