Our A332NG

[CBreuer]

Our TCA A332 NG is a great plane, but since the panel was originally designed for FS 2002, FS 9 gives a lot o error messages while loadihttp://www.tradewind.org/forum/images/smilies/question.gifng the plane. I have to press ctr+alt+del to exit FS 9 and use the task manager. Curious, doing this operation, I have FS9 running back, but after sometime
FS9 finally freezes with a message saying didn´t localized FSIUPC or FSWide and then I can not fly anymore, and have to shut down FS9.
I tried to use the plane with another Airbus panel, but apparently this plane only works with the original one wich comes in the TCA package?

Hi Rodrigo,

you did read the readme.txt?
_____________________________________________________________
Installation:

Install to your FS9 ROOT folder.

NB:
-------------------------
Important!

The panel requires FSsound.dll to be installed to your FS9\modules folder. - (file included in a zip inside the
TCA_NG_A330-200 folder.

To avoid recieving an error box when loading FS9 you should add the following to your FS9.config file after
doing the usual backup for safety;

Open the file with notepad and add the following lines to the [OLDMODULES] section

[OLDMODULES]
FSsound.dll=1


Save and close

_____________________________________________________________

I hope this was of some kind of help for you. If not you surely would let us know.
FYI I havn't installed the aircraft, but extracted it to a different folder to see all the data which is inside the zip-file more easily.