08-10-2016, 08:09 PM
I seem to be always one day behind of making these flights, but that is no problem. Now here are some pictures of the flight from Colombo to Melbourne, but first lets start again with the ATC flightplan:
(FPL-TWL809-IS
-B77L/H-SDE1FGHIJ1RWXYZ/LB1
-VCBI1415
-N0499F330 ANUT1D ANUTI DCT CL N640 EMVAS/N0501F350 N640 ISLAV/N0490F370 N640
AD DCT BENDO Y12 ARBEY ARBE8A
-YMML0856 YSSY
-PBN/A1B1C1D1L1O1S1 NAV/RNVD1E2A1 DOF/160809 REG/PJLRG
EET/YMMM0147
SEL/EGAP CODE/48FE56 RVR/75 OPR/TRADEWIND LOGISTICS ORGN/TNCCTWLF
PER/D
RALT/VCRI WIEE YPLM
-E/1137)
As we had a night departure I didn't take any pictures of the departure, but I took a picture as the sun was still rising over Australia. Here we are somewhere off the coast of Australia:
Nearly 45 minutes later we were passing Adelaide:
Two hours later we were already approaching MEL via ARBEY8Z for an RNAV Z34 approach to runway 34.
Melbourne to our left:
Turning to final.
Established and on finals:
The approach was really nice with good frames, but as soon as I hit the ground the refresh rate dropped to a level where it was not funny to do anything, so I shut P3D down and did another try after deleting all the shaders. But this didn't help much, but it was a little bit better, so we were able to taxi to our parking position H1.
Parking brake set for a BTB time of 9:18.
Time to unload the aircraft, give the crew a little rest for their next flight to Pago Pago.
Melbourne V3 from ORBX is a nice scenery although at least I seem to have some issues with it. I've already ordered a new graphics card, but I doubt that my problems are related to the graphics card only... We will find out sooner or later.
(FPL-TWL809-IS
-B77L/H-SDE1FGHIJ1RWXYZ/LB1
-VCBI1415
-N0499F330 ANUT1D ANUTI DCT CL N640 EMVAS/N0501F350 N640 ISLAV/N0490F370 N640
AD DCT BENDO Y12 ARBEY ARBE8A
-YMML0856 YSSY
-PBN/A1B1C1D1L1O1S1 NAV/RNVD1E2A1 DOF/160809 REG/PJLRG
EET/YMMM0147
SEL/EGAP CODE/48FE56 RVR/75 OPR/TRADEWIND LOGISTICS ORGN/TNCCTWLF
PER/D
RALT/VCRI WIEE YPLM
-E/1137)
As we had a night departure I didn't take any pictures of the departure, but I took a picture as the sun was still rising over Australia. Here we are somewhere off the coast of Australia:
Nearly 45 minutes later we were passing Adelaide:
Two hours later we were already approaching MEL via ARBEY8Z for an RNAV Z34 approach to runway 34.
Melbourne to our left:
Turning to final.
Established and on finals:
The approach was really nice with good frames, but as soon as I hit the ground the refresh rate dropped to a level where it was not funny to do anything, so I shut P3D down and did another try after deleting all the shaders. But this didn't help much, but it was a little bit better, so we were able to taxi to our parking position H1.
Parking brake set for a BTB time of 9:18.
Time to unload the aircraft, give the crew a little rest for their next flight to Pago Pago.
Melbourne V3 from ORBX is a nice scenery although at least I seem to have some issues with it. I've already ordered a new graphics card, but I doubt that my problems are related to the graphics card only... We will find out sooner or later.